Time Period Set
Press OK and use UP/DOWN keys (to change the setting) and LEFT/RIGHT keys ( to
move to the next fi eld ) to set time. Once all settings are made, press OK to save.
Note:
two time blocks can not appear in overlap section, or you will not set it successfully.
For example: A 8:00-12:00 B 13:00-23:00, this is OK for set.
Time Scan
Time Scan (Time Lapse) recording mode on/off . When activated, Time Scan forces the
camera to take photos or videos even when it is not triggered by an nearby live animal,
useful for constant monitoring of an area that might be far away from the camera.
The user can set start and stop times for up to two in dependent “blocks” of Time Scan
recording, as well as the interval time between each photo/video
Language
Selects user's preferred language from defi ned nine languages.
33
DE
EN
Manual_3310007_Observation-camera-DL-30MP_de-en_BRESSER_v102020a.indb 33Manual_3310007_Observation-camera-DL-30MP_de-en_BRESSER_v102020a.indb 33 09.11.2020 14:17:5909.11.2020 14:17:59
To Next Page
Loading...
Need help?
General
