27
RESET button (Fig. 1, 13)
In case of malfunction, press by using a metal pin to reset
all the values.
Reverse button (Fig. 1,14)
Press it to reverse the projected data.
Projector arm (Fig. 1, 2)
Projecting the current time, temperature and weather
forecast on walls or ceilings. Rotatable up to 180
degrees.
The focusing Projector (Fig. 1, 4)
Turn the focusing wheel to adjust the sharpness of the
projected data.
PROJECTION ON switch (Fig. 1, 15)
Note: This function is only applicable when powered by
DC adaptor.
Slide to ON position to keep projection activated
continuously or vice versa.
LIGHT ON switch (Fig. 1, 16)
Note: This function is only applicable when powered by
DC adaptor.
Slide to ON position to keep backlight activated
continuously or vice versa.
L/H switch (Fig. 1, 17)
Set backlight brightness.
Slide to L position for dimmer backlight. (low)
Slide to H position for brighter backlight. (high)
DE
GB
FR
NL
ES
IT
To Next Page
Loading...
