Need help?Do you have a question about the Bresser WIFI WSC PRO 7in1 and is the answer not in the manual?
General| Brand | Bresser |
|---|---|
| Model | WIFI WSC PRO 7in1 |
| Category | Weather Station |
| Language | English |
Warning about chemical burn hazard from batteries, ingestion, and handling.
Steps for installing and operating the weather station and uploading data.
Recommended operation of the station in an accessible location before permanent installation.
Guidelines for choosing an optimal location for the outdoor sensor array.
Detailed instructions for installing the outdoor wireless 7-in-1 sensor array.
Step-by-step guide for attaching the wind vane to the sensor array shaft.
Instructions for attaching the rain gauge funnel to the sensor array.
Guide for inserting AA batteries into the wireless sensor array.
Overview of the mounting kit components and installation process.
Instructions for orienting the sensor array to point North.
Guide for aligning the sensor for Southern Hemisphere use.
Steps to install backup battery and connect the console to power.
Initial console startup screen and AP mode activation.
Process for pairing the wireless sensor array with the display console.
How to clear erroneous sensor data after initial installation.
Explanation of the main display elements and their meanings.
Detailed description of each button on the display console and its function.
How the console predicts weather based on barometric pressure.
Explanation of absolute and relative pressure readings and trends.
How to view historical hourly barometric pressure data.
How to toggle between Absolute and Relative pressure readings.
Displays and indicators for outdoor temperature and humidity readings.
How to view Feels Like, Heat Index, and Wind Chill readings.
Displays and indicators for indoor temperature and humidity readings.
Overview of wind speed, direction, and gust indicators.
Table correlating wind speeds with descriptive terms and land conditions.
Details about rainfall and rain rate measurements.
How to toggle between different rainfall data views (Day, Week, Month, Total, Rate, Event).
Procedure to clear all recorded rainfall data.
Information on UV index readings and exposure levels.
Table mapping UV index to sunburn time and recommended protection.
Shows sunlight intensity readings.
Information on maximum and minimum recorded weather data.
How to check daily and cumulative maximum/minimum readings.
Procedure to reset all recorded maximum and minimum values.
Explains the moon phase icons based on hemisphere and date.
How to interpret the wireless sensor signal strength indicator.
Indicates the status of console time synchronization with internet servers.
How to interpret the Wi-Fi connection status icon.
Guide to setting time, date, format, hemisphere, units, and language.
How to set a specific time for an alarm to sound.
Setting an alert for when indoor temperature exceeds a high threshold.
Setting an alert for when indoor temperature drops below a low threshold.
Setting an alert for high indoor humidity levels.
Setting an alert for low indoor humidity levels.
Setting an alert for high outdoor temperature.
Setting an alert for low outdoor temperature.
Setting an alert for high outdoor humidity.
Setting an alert for low outdoor humidity.
Setting an alert for high wind speeds.
Setting an alert for high rain rates.
Setting an alert for significant pressure drops over 30 minutes.
How to check the set alarm times and weather alert thresholds.
How time alarms function, snooze, and stop.
How weather alerts function and how to stop them.
How to adjust the console's backlight brightness.
Instructions for downloading the necessary mobile application for Wi-Fi setup.
How to activate and recognize the console's Access Point mode.
Step-by-step guide to connect the console to the WSLink app.
Detailed steps within the WSLink app for network, device, and weather server configuration.
Steps to upload data to Weather Underground using Station ID and key.
Steps to upload data to Weathercloud using Station ID and key.
Instructions for uploading data to a customized server.
Guide for calibrating various sensor readings and offsets.
Procedure for updating the console's firmware via the WSLink app.
Step-by-step guide to register and set up a Weather Underground account.
Steps to register and set up a Weathercloud account.
How to view weather station data on the Weather Underground website.
How to view weather station data on the Weathercloud website.
How to access live weather data through the WSLink app dashboard.
Steps for updating the console's firmware using the WSLink app.
How to replace batteries in the 7-in-1 sensor array.
Steps to re-synchronize the sensor array after battery replacement.
How to perform a soft reset or a factory reset on the console.
Instructions for replacing parts and cleaning the sensor array components.
Technical details of the display console, including dimensions, power, and Wi-Fi.
Technical details of the barometer function.
Technical details for indoor temperature measurement.
Technical details for indoor humidity measurement.
Technical details for outdoor temperature measurement, including index modes.
Technical details for outdoor humidity measurement.
Technical details for wind speed and direction measurement.
Technical details for rain measurement.
Technical details for UV index measurement.
Technical details for light intensity measurement.
Technical details of the outdoor wireless sensor.
To Next Page