Need help?Do you have a question about the Breville AirRounder Plus Connect and is the answer not in the manual?
General| Brand | Breville |
|---|---|
| Model | AirRounder Plus Connect |
| Category | Air Cleaner |
| Language | English |
Carefully read all instructions before operating the purifier fan heater for the first time and save for future reference.
Ensure proper assembly and remove packaging material before using the purifier fan heater for the first time.
Eliminate choking hazards, avoid touching hot parts, and allow cooling before moving the unit.
Carry by the base, keep combustible materials away, supervise children, and avoid use near water.
Avoid damaged cords, do not cover cord, avoid placement below outlets, and do not use timers.
Ensure ample space around the unit, do not block air inlets/outlets, and check for dust accumulation.
Do not operate on sinks, avoid electrical overload, do not use outdoors or for commercial use.
Fully unwind cord, connect to correct voltage, and prevent cord from hanging or knotting.
Not for persons with reduced capabilities unless supervised; children must be supervised to prevent play.
Do not use if damaged; return to service centre for examination or repair.
Always turn off, switch off at outlet, and unplug when not in use; allow parts to cool before cleaning/storing.
Do not place near heat sources; maintain 1m distance from walls/curtains for air circulation.
Identifies the main parts of the purifier fan heater, including control panel, grille, vent, and filter.
Details the buttons and functions available on the remote control for operating the appliance.
Explains the operation of the touch-sensitive buttons for timer, oscillation, cooling, heating, and power.
Describes the LED display elements for temperature, Wi-Fi status, air quality index, and filter replacement.
Details the three-level air purification system: Pre-Filter, True HEPA Filter, and Activated Carbon Membrane.
Explains the function of the light ring indicating heating (red) or cooling (blue) mode, and how to switch it off.
Describes the Tip-Over Cut-Out Switch and THERMOSECURE™ Protection for user and appliance safety.
Steps to prepare the purifier fan heater before initial operation, including checking parts and packaging.
Guidelines for selecting a location, ensuring airflow, and connecting the power plug to a suitable outlet.
Instructions for turning the unit on and off using the control panel or remote control.
Details the air quality monitoring system, its colour indicators, and PM2.5 measurement.
Explains the temperature sensor and how the room ambient temperature is displayed on the LED screen.
Describes the three cooling fan settings (LOW, MEDIUM, HIGH) and how to select them.
Explains the three heat settings (LOW, MEDIUM, HIGH) and how to set the desired temperature.
Instructions on how to set and adjust the target temperature for heating mode.
Details how to set the 7-hour auto-off timer and how the remaining time is displayed.
Explains the light-sensitive sensor that automatically dims the display and light ring in dark environments.
Describes how to activate and adjust horizontal oscillation settings (60°, 120°, 360°).
Instructions on how to activate and deactivate the child lock feature to prevent accidental operation.
Explains the 'REPLACE FILTER' icon and the procedure to reset it after filter replacement.
Details how to use the remote control, including battery replacement and optimal operating distance.
Steps to connect the purifier fan heater to a home Wi-Fi network using the Breville Home Connect™ app.
Information on mobile OS compatibility and the need for the unit to be plugged in for app control.
Instructions for cleaning external surfaces using a dry cloth and frequency based on environmental conditions.
How to clean the air quality sensor cover and mesh filter using vacuuming and a screwdriver.
Warnings against washing the filter or using harsh cleaners, solutions, or sharp objects.
Guidance on when to replace the filter and the steps for removing and installing a new filter.
Details on where to purchase replacement filters and product codes for different models.
Advice on storing the purifier fan heater upright in a cool, clean, and dry location when not in use.
Solutions for problems like the unit not starting, insufficient airflow, or excessive noise.
Guidance for issues such as light ring not illuminating, no heating, poor air quality, or filter indicator problems.
Troubleshooting steps for connecting the purifier to a Wi-Fi network and changing network settings.
Solutions for issues with app connectivity, offline status, and re-pairing the device.
To Next Page
