Breville Cli-mate CLI-AP20 - Operation Instructions; Operating the Unit Step-by-Step; Display Panel Indicators

8
1. Plug unit into power socket, unit is now
in standby mode.
2. Press POWER button to turn unit on.
The unit will beep and display panel lights
will illuminate indicating current settings.
NOTE
The purification default setting is at LOW
speed mode.
3. To select speed, press until LED Light
is on desired speed-LOW, MEDIUM, HIGH,
SLEEP respectively.
NOTE
To select SLEEP mode on the remote control,
press button.
4. To set automatic off timer, press until
LED light is on desired time 1/4/8 hours.
Unit will automatically switch off once
selected time duration has lapsed.
5. To select AUTO-MODE, press and the
AUTO led light will be lit. The unit will
now start purifying in a loop cycle on these
settings: HIGH speed for 2 hours MEDIUM
speed for 2 hours LOW speed for 2 hours.
6. To activate CHILD-LOCK function, press
on the remote control, alternatively press
and hold the for 3 seconds on the unit.
The CHILD-LOCK light on the unit will
be lit when this feature is activated. This
function will lock the control buttons on the
unit and remote control.
NOTE
To deactivate the CHILD-LOCK function,
hold the button on the remote control
or the on the unit for 3 seconds until the
CHILD-LOCK light on the control panel
extinguishes.
DISPLAY PANEL
1. Fan Speed Indicator
a. High speed
b. Medium speed
c. Low speed
d. Sleep (Ultra-quiet mode)
2. Power Indicator – Illuminates when
power is ON.
Filter Change – Light flashes when
filter needs to be changed.
3. Automatic Mode – operates in a loop cycle
on these settings: HIGH speed for 2 hours
– MEDIUM speed for 2 hours – LOW
speed for 2 hours.
4. Child-Lock – Icon illuminates when
Child-Lock function activated. Press
on the remote control to activate.
5. Timer
e. 1 hour f. 4 hours g. 8 hours
AUTO
1H
4H
8H
2 3 41 5
a. e.b. f.c. g.d.
OPERATION INSTRUCTIONS
Important: Before first use open front cover and unwrap filter before operation.
See page 9 for filter details.