To Next PageTo Next PageWhat to do if my Breville Juicer won't switch on?
If your Breville Juicer will not switch on, check the Overload Protection Button on the bottom of the Motor Base to see if the safety device has been activated automatically.
Why does my Breville Juicer motor stall when juicing?
If your Breville Juicer motor stalls, it could be due to wet pulp building up under the cover from juicing too vigorously. Try juicing slower by pushing the food pusher down more slowly. Also, clean the Filter Bowl Surround, Stainless Steel Filter, and Juicer Cover. Selecting HIGH speed instead of LOW speed may also help.
What to do if pulp is too wet and juice extraction is reduced in Breville ELITE JUICE FOUNTAIN ELITE?
If you notice the pulp is too wet and juice extraction is reduced with your Breville Juicer, try juicing at a slower pace. Also, remove the Stainless Steel Filter Basket and thoroughly clean the mesh walls with a fine brush. Rinse the Stainless Steel Filter Basket under hot water. If the mesh holes are blocked, soak the Stainless Steel Filter Basket in a solution of hot water with 10% lemon juice to unblock the holes, or wash it in the dishwasher (top rack). This removes excess fiber buildup that inhibits juice flow.
General| Type | Centrifugal Juicer |
|---|---|
| Feed Chute Width/Size | 3 inches |
| Speed Settings | 2 |
| Material | Stainless Steel |
| Warranty | 1 year |
| Juice Jug Capacity | 1 liter |
| Juice Extraction System | Centrifugal |
| Safety Features | Safety locking arm |
Guidelines for using the appliance's power cord and extension cords safely.
Critical safety warnings for appliance operation, maintenance, and unattended use.
Instructions for operating the juicer, including speed selection for different produce.
Comprehensive guide to cleaning the juicer, including filter basket care and dishwasher use.
