To Next PageTo Next PageWhat to do if my Breville Juice Fountain Elite won't switch on?
If your Breville Juicer doesn't switch on, check the Overload Protection Button on the bottom of the Motor Base to see if the safety device has been activated automatically.
Why does juice leak from my Breville Juice Fountain Elite Juicer?
If juice leaks between the rim of the Juicer Cover and the Stainless Steel Filter Basket of your Breville Juicer, try a slower juicing action by pushing the food pusher down more slowly. Fruit and vegetables with a high water content (tomatoes and watermelon) should be juiced on low speed.
What to do if my Breville Juice Fountain Elite Juicer leaks juice from the rim?
If the juice leaks between the rim of the Juicer Cover and the Stainless Steel Filter Basket of your Breville Juicer, try juicing at a slower pace by pushing the food pusher down more slowly. Also, when juicing fruits and vegetables with high water content, such as tomatoes and watermelon, use the low-speed setting.
What to do if my Breville Juice Fountain Elite will not switch on?
If your Breville Juicer unit will not switch on, check the Overload Protection Button on the bottom of the Motor Base to see if the safety device has been activated automatically.
Why won't my Breville Juicer turn on?
If your Breville Juicer machine will not work when switched “ON”, the Safety Locking Arm may not be correctly engaged in the vertical operating position. Ensure the locking arm is located into the two grooves on either side of the Juicer Cover.
What to do if there's excess pulp in the Stainless Steel Filter Basket of my Breville Juicer?
If excess pulp builds up in the Stainless Steel Filter Basket of your Breville Juicer, stop the juicing process. Remove the juicer cover, and scrape off the pulp. Re-assemble and begin juicing again. Try alternating between soft and hard vegetable and fruit varieties.
How to prevent pulp buildup in my Breville Juicer?
If excess pulp builds up in the Stainless Steel Filter Basket of your Breville Juicer, stop the juicing process. Remove the Juicer Cover and scrape off the pulp. Re-assemble the parts and begin juicing again. Try alternating between soft and hard vegetable and fruit varieties.
Why does my Breville Juice Fountain Elite Juicer motor stall when juicing?
If the motor of your Breville Juicer stalls, it might be due to wet pulp building up under the cover because the juicing action is too vigorous. Try a slower juicing action by pushing the food pusher down more slowly. Also, clean the filter bowl surround, the stainless steel filter, and the juicer cover. Selecting HIGH speed instead of the LOW speed setting may also help.
Why is the pulp too wet and the extracted juice reduced in my Breville Juice Fountain Elite?
If the pulp is too wet and the extracted juice is reduced when using your Breville Juicer, try a slower juicing action. Remove the Stainless Steel Filter Basket and thoroughly clean the mesh walls with a fine brush. Rinse the Stainless Steel Filter Basket under hot water. If the mesh holes are blocked, soak the Stainless Steel Filter Basket in a solution of hot water with 10% lemon juice to unblock the holes or wash in the dishwasher (top rack). This will remove excess fiber build up (from fruit or vegetables) which could be inhibiting the juice flow.
Why does my Breville Juice Fountain Elite spray juice out from the spout?
If your Breville Juicer sprays juice out from the spout, try a slower juicing action by pushing the food pusher down more slowly.
General| Motor Power | 1000 Watts |
|---|---|
| Feed Chute Size | 3 inches |
| Dishwasher Safe Parts | Yes |
| Type | Centrifugal Juicer |
| Safety Features | Overload protection |
| Speed Settings | 2 (High and Low) |
| Juice Jug Capacity | 1.1 liters |
Safety feature preventing operation without cover and arm locked.
Allows selection between low and high speed operation.
Houses the powerful 1000-watt motor.
Fine mesh filter for efficient juice extraction.
