Inspection, Service and Maintenance
Bri-Mar 118
Inspection and Service Each Year or 12,000 Miles
Item Inspection / Service Manual Section
Reference
Brakes, all types
> Shoes and drums
Check for scoring and
wear. Replace per
manufacturer’s
specifications
Section 8.2.3.1
See Brake Mfr’s Manual
Jack, Drop-leg Grease gears at top See Jack Mfr’s Manual
Structure
> Frame members
> Welds
Inspect all frame
members, bolts & rivets.
Repair or replace
damaged, worn or
broken parts
Section 8.2.1
Section 8.2.2.2
Wheels
> Wheel Bearings
> Rims
Check and confirm free
running.
Inspect for cracks &
dents. Replace as
needed.
See Axle Mfr’s Manual
Section 8.2.11
Structure
> Axle Attachment
Bolts
Check BY DEALER
Section 8.2.1
8.2 INSPECTION AND SERVICE INSTRUCTIONS
8.2.1 Axle Bolts, Frame, Suspension, & Structure
^ WARNING
Worn or broken suspension parts can cause loss of control and injury
may result.
Have trailer professionally inspected annually and after any impact.
To perform many of the inspection and maintenance activities, you must
jack up the trailer.
When jacking and using jack stands, place them so as to clear wiring,
brake lines, and suspension parts (springs, torsion bars, etc.). Place jacks
and jack stands under the outer frame rail.
Trailers
To Next Page
Loading...