EasyManua.ls Logo

Brickcom WCB-100Ap User Manual

Brickcom WCB-100Ap
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Confidential © Brickcom Corporation, All Rights Reserved.
WWW.BRICKCOM.COM | EXPERT IN IP SURVEIL LANCE
Quick Installation Guide
for WCB-100Ap
May 17, 2011
Question and Answer IconNeed help?

Do you have a question about the Brickcom WCB-100Ap and is the answer not in the manual?

Brickcom WCB-100Ap Specifications

General IconGeneral
Frequency Band2.4 GHz
SecurityWEP, WPA, WPA2
Ethernet Ports1 x 10/100 Mbps
Wireless StandardsIEEE 802.11b/g
Antenna TypeInternal
Power over Ethernet (PoE)802.3af
Operating ModeRepeater

Summary

WCB-100Ap Camera Hardware

Component Identification and Ports

Identifies physical features, ports, and indicators on the WCB-100Ap camera.

DWRT-600N Router Hardware

Component Identification and Ports

Details physical ports, buttons, and LED indicators on the DWRT-600N router.

Wi-Fi Connection Setup

Automatic Connection and Reset

Explains automatic Wi-Fi connection and device factory reset procedures.

Wi-Fi Connection Using WPS

WPS Setup Steps and LED Status

Provides step-by-step WPS connection guide and explains LED indicators.

Brickcom Software Suite

Software Kit Contents and Installation

Details the Brickcom Software Kit components and PC installation process.

EasyConfig Utility Features

Simple and Professional Modes

Explains EasyConfig modes for camera discovery, connection, and advanced configuration.

PC-NVR Recording Software

Recording, Live View, and Playback

Describes PC-NVR for 64-channel recording, live view, and playback capabilities.

EasyConfig Workflow

Step-by-Step Configuration Process

Illustrates the workflow for camera configuration using EasyConfig, including connection and live view.

Usage Notes and Tips

Focus Adjustment and Performance

Provides guidance on focus, wireless range, and optimizing PC performance for video feed.