EasyManua.ls Logo

Bricon 100 - The Three Types of Antennas in the BRICON Range; 2-Field Antenna; 3 Installing the System

Default Icon
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Choice of 2, 4 or 6 field antennas (compatible).
Maximum 16 antennas connectable.
An own printer can be connected, 7 different lists can be printed.
Modem / fax can be connected for the announcements.
LittleLittle BRICON
100/500/1000
2.3.The three types of antennas in the BRICON range.
2.3.1. 2-field antenna.
28 cm wide
registers on the total
surface.
2.3.3. 4-field antenna.
50 cm wide.
registers on the total
surface.
2.3.3. 6 path antenna.
75 cm wide.
registers on the total
surface.
2 field, 4 field, 6 field antenna
3. Installing the system.
Before using the system, several steps need to be done.
First the antenna(s) need to be programmed. Then the system must be
installed on a correct and proper way. The next step is to test the
antenna(s). The last step is to couple the electronic chip ring to the National
Foot ring number. Each step is explained in a separate chapter.

Related product manuals