9 BRICON nv - Speedy
- Read out.
•
When the race is finished you return to your club with Speedy.
Speedy is connected to the club-antenna. Select “Read out” in
the menu and press <OK>
•
Speedy displays “Choose Race: 1” select the race by pushing
<NEXT> or <PREVIOUS>. Confirm with <OK>.
•
Synchronisation is done automatically by an atom– or Bricon
master-clock if they are linked to the club-antenna.
•
A clocking-list is printed twice.
•
After printing the Speedy display shows : “Close race”, press
“OK”. This closes the race and releases the security-flag for the
birds basketed in this race. If this is not confirmed by pressing
<OK>, all data will stay secured, meaning that all these pi-
geons can’t be re-entered for a future race.
•
Connecting to the loft-antennas Speedy will start in training
mode.
•
Attention !! First “delete” racing-data before clocking.
•
Chose “Delete” by pushing <NEXT> and confirm with <OK>.
Then return to “Clocking” by pushing <PREVIOUS> and con-
firm with <OK>.
In Belgium Speedy only operates with a club-master.
To Next Page
Loading...
Need help?
General
