Need help?Do you have a question about the Brigade BS-7100 and is the answer not in the manual?
Provides details on the detection range and width of the BS-7100 system.
Explains how the system detects objects, including limitations and performance factors.
Illustrates the horizontal and vertical detection areas for people and vehicles.
Details various factors affecting object detection accuracy and reliability.
Details how to connect the sensor and display units.
Guidance on selecting an appropriate location for system installation.
Explains the wiring and electrical connections for the system.
Instructions on how to mount and position the radar sensor.
Specifies the correct orientation for the sensor unit.
Details the method and hardware for securing the sensor.
Advises on avoiding vehicle parts that might obstruct the detection zone.
Provides recommendations for adjusting the sensor's mounting angle.
Explains the implications of off-centre mounting on detection accuracy.
Guidance on routing and protecting the system's cables.
Covers mounting, physical features, and operational feedback of the display unit.
Guides the user through the first power-on and basic testing procedures.
Lists common error states and their corresponding troubleshooting actions.
Details how to define and configure the system's detection zones.
Covers specific configuration settings for detection range and width.
Guidance for vehicle operators on using and understanding the system.
Outlines the procedures for routine maintenance and functional testing.
General| Brand | Brigade |
|---|---|
| Model | BS-7100 |
| Category | Security Sensors |
| Language | English |
To Next Page