Briggs & Stratton 1679-0 User Manual

Owner’s Manual
Manual del Propietario
Manuel de l'Utilisateur
Questions? Help is just a moment away!
Preguntas? La ayuda es justa un momento
lejos!
Vous avez des questions? Vous n'avez pas
besoin d'aller loin pour trouver de l'aide!
Call: Home Standby Helpline
Llamada: Línea Directa de Reserva de Hogar
Appelez: Ligne Directe de Secours À la Maison
- 1-800-743-4115 M-F 8-5 CT
Web: www.briggsandstratton.com
Model 1679-0 Part No. 190839GS
Rev. 3 (01/03/2003)

Briggs & Stratton 1679-0 Specifications

General

Engine Brand	Briggs & Stratton
Voltage	120V
Run Time at 50% Load	8 hours
Noise Level	68 dBA
Engine Type	4-Stroke OHV
AC Outlets	2 x 120V 20A Outlets

Summary

SAFETY RULES

INTRODUCTION

Installation Assistance

Guidance for owners and contractors regarding generator system installation.

OWNER ORIENTATION

Information to help owners achieve a satisfactory and cost-effective installation.

Fuel Factors

Power Decrease at High Altitude or High Temperature

Explains how altitude and temperature affect generator power output.

Generator Location

Discusses the impact of generator placement on installation requirements.

Generator Clearances

Specifies minimum distances required around the generator unit for safety.

Essential Circuits

Selection of Essential Circuits

Guides owners in identifying and selecting circuits for generator power during outages.

UNPACKING

Delivery Inspection

Instructions for checking the generator and transfer switch for damage upon delivery.

Shipment Contents

Lists all items included in the Home Generator System package.

KNOW YOUR BACKUP GENERATOR

KNOW YOUR SYSTEM CONTROL PANEL

Access Doors

To Remove an Access Door

Step-by-step instructions for safely removing an access door from the generator enclosure.

To Install an Access Door

Step-by-step instructions for properly installing an access door onto the generator enclosure.

BEFORE INITIAL START-UP

Engine Oil

Guidance on checking and maintaining engine oil levels before starting the generator.

Battery Connection

Instructions for connecting the generator's rechargeable battery, including fuse installation.

Gaseous Fuel System

Ensures proper and safe connections for gas fuel supply to the generator.

The AUTO/OFF/MANUAL Switch

Explains the function and usage of the system's primary control switch.

AUTOMATIC OPERATION

Checking Automatic Operation

Procedures to verify the correct automatic startup and operation of the generator system.

Stopping the System

Steps to disable the power transfer system for maintenance or service.

Setting Exercise Timer

Instructions on how to program the generator's automatic exercise cycle.

SPECIFICATIONS

Generator

Technical specifications for the generator unit, including model, power, and voltage ratings.

Transfer Switch

Technical specifications for the automatic transfer switch, including circuit and load limits.

MAINTENANCE

Fault Detection and Indicators

Explains the system's sensors and LED indicators for detecting and reporting faults.

Common Fault Conditions and Troubleshooting

Details faults like low voltage, engine start failure, and overspeed, with troubleshooting steps.

Engine Maintenance Procedures

Covers changing engine oil, cleaning the generator, and factory contact information.

GENERATOR MAINTENANCE

Changing Engine Oil

Step-by-step guide for draining and refilling the engine oil for proper maintenance.

To Clean the Generator

Recommended methods for cleaning the generator unit safely and effectively.

If You Call the Factory

Information required when contacting the manufacturer for service or repair.

STORAGE

Guidance on precautions, if any, for storing the generator system.

TROUBLESHOOTING

Engine is running, but no AC output is available.

Addresses issues where the engine operates but no electrical output is generated.

Engine runs good at no-load but 'bogs down' when loads are connected.

Troubleshoots engine performance issues when electrical loads are applied.

Engine will not start; or starts and runs rough.

Guides on diagnosing and resolving engine starting or rough running problems.

Engine shuts down during operation.

Addresses potential causes for the engine stopping unexpectedly during operation.

UNIT SCHEMATIC DIAGRAM

UNIT WIRING DIAGRAM

TRANSFER SWITCH SCHEMATIC DIAGRAM

TRANSFER SWITCH WIRING DIAGRAM

UNIT EXPLODED VIEW

UNIT PARTS LIST

ENCLOSURE EXPLODED VIEW

ENCLOSURE PARTS LIST

INSULATION SET EXPLODED VIEW

INSULATION SET PARTS LIST

ALTERNATOR EXPLODED VIEW AND PARTS LIST

CONTROL PANEL EXPLODED VIEW AND PARTS LIST

TRANSFER SWITCH EXPLODED VIEW

TRANSFER SWITCH PARTS LIST