This document is an operator's manual for a Triple Catcher attachment, specifically designed for 46" and 52" Regent and NXT Mowers. The manual, identified by part number 1695776 and revision B (1750622), provides comprehensive instructions for the assembly, operation, and maintenance of the attachment.
Function Description:
The Triple Catcher is an attachment designed to collect grass clippings from a lawn mower. It consists of a series of tubes, baffles, a hitch and frame assembly, and multiple collector bags. The system is engineered to direct cut grass from the mower deck through a tube assembly into the collector bags, effectively bagging the clippings during mowing operations. This helps maintain a clean lawn by preventing cut grass from being left on the surface. The attachment is designed for easy installation and removal, allowing users to switch between bagging and other mowing modes as needed.
Important Technical Specifications:
- Compatibility: Designed for 46" and 52" Regent and NXT Mowers.
- Components: Includes baffles, a hitch and frame assembly, tube assembly, and collector bags.
- Mounting Hardware: Utilizes various bolts, spacers, speed nuts, and locknuts for secure attachment to the mower deck and frame.
- For 46" Mower Decks:
- 2.0" carriage bolt (D) with longest spacer (E) and flange whiz locknut (F) for the baffle.
- .75" carriage bolt (H) with flange whiz locknut (F) for the baffle.
- For 52" Mower Decks:
- 1.25" carriage bolt (D) with shortest spacer (E) and flange whiz locknut (F) for the baffle.
- .75" carriage bolt (H) with flange whiz locknut (F) for the baffle.
- Frame Hung Mowers (Front-right wheel bracket):
- 1.25" carriage bolt (C) with .312" ID, 1.25" OD washer (D) and flange locknut (E).
- Free Floating Mowers (Discharge opening):
- 1.25" carriage bolt (A) with .341" OD, 1.0" OD washer (B), spacer (C), .341" OD x .75" OD washer (D) and flange locknut (E).
- Hitch and Frame Assembly:
- 5/16-18 speed nut (A) and 5/16-18 shoulder bolt (D) for securing the hitch to the rear frame support.
- Four 3/8-16 x .875 bolts (C) and four 3/8-16 whiz locknuts (D) for attaching the bag and cover support to the upright support.
- Hinge pivots (C), hinge pins (D), and hair pins (E) for securing the cover assembly.
- Tube Assembly: Features a latch mechanism for secure attachment to the mower.
- Collector Bags: Multiple bags designed to hang from a bag hanger post, collecting grass clippings.
Usage Features:
- Operator Safety: The manual emphasizes critical safety warnings, including the importance of reading the operator's manual, knowing controls, disengaging PTO, checking for debris, and avoiding reverse mowing. It also provides specific safety decals to be aware of, such as "Thrown Objects Hazard" and "Do not operate the mower without the complete catcher."
- Assembly Process: Detailed, step-by-step instructions with accompanying figures guide the user through installing the mower mounting hardware, baffles, hitch and frame, tube assembly, and collector bags.
- Mower Mounting Hardware Installation: Involves installing specific bolts, washers, spacers, and locknuts on both frame-hung and free-floating mower types.
- Baffle Installation: Requires lifting the side discharge chute, inserting the appropriate baffle (shortest for 46" decks, longest for 52" decks), and securing it with carriage bolts, spacers, and locknuts.
- Hitch and Frame Assembly: Involves sliding speed nuts, installing shoulder bolts, attaching the bag and cover support, and securing the cover assembly with hinge pivots and pins.
- Tube Assembly: Instructions for securing the tube to the mower deck and connecting the upper and middle tubes, aligning ridges and cutouts.
- Attach Collector Bags: Simple process of raising the cover and hanging the bags on the bag hanger post.
- Operation:
- Collector Installation: Guides the user on mounting the hitch and frame assembly, sliding the upper tube into the cover, raising the cover, and attaching the collector bags. It notes that the seat may need to be folded forward to keep the cover raised.
- Before Operation: Advises clearing sticks, stones, and other debris, checking for wet grass, ensuring a snug fit between mower deck, blower housing, tubes, and grass catcher cover.
- Mowing with the Catcher: Recommends operating at full speed, cutting grass in short passes, and emptying bags before they become too full.
- After Operation: Instructions for removing debris from the screen, cleaning the blower housing and tube, and inspecting grass bags for wear.
- Collector Removal: Provides a clear sequence for removing the collector, including lifting the cover, removing bags, detaching the hitch and frame, loosening the middle tube strap, lifting the discharge deflector, removing the mounting strap, and removing the baffle.
Maintenance Features:
- Storage:
- Storing The Grass Catcher: Recommends cleaning the grass catcher thoroughly using a mild detergent, removing any debris from the screen, touching up scratched metal parts with paint, and storing in a dry area away from moisture.
- Warranty: The manual includes a detailed "BRIGGS & STRATTON PRODUCTS WARRANTY POLICY" which outlines:
- LIMITED WARRANTY: Covers defects in material or workmanship for a specified period (12 months for consumer use, None for commercial use).
- Warranty Service: Explains how to obtain warranty service, requiring the customer to contact an Authorized Service Dealer.
- Exclusions: Specifies conditions not covered by warranty, such as normal wear and tear, damage from improper use, lack of maintenance, alterations, or environmental factors.
- Implied Warranties: Limits implied warranties to the duration of the express warranty.
- Disclaimer: States that the company is not responsible for incidental or consequential damages.
The manual emphasizes the importance of safety throughout, with warnings and cautions highlighted to prevent injury or damage. It also provides clear illustrations to aid in the assembly and operation processes.
Need help?
General
To Next Page