EasyManuals Logo

Briggs & Stratton 194700 Series User Manual

Briggs & Stratton 194700 Series
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
STARTING AND STOPPING
REWIND (MANUAL) STARTER
TO START ENGINE
[1] Check oil level (see p. 7).
[2] If choke and throttle con-
trols are separate, move
choke control to CHOKE.
Move throttle to FAST.
[3] If choke and throttle are
on the same control,
move lever to CHOKE or
START.
Choke Throttle
Choke/throttle control
[4] Insert key and turn to
RUN.
[5] Grasp rope handle. Pull
slowly until resistance is
felt, then pull rapidly to
start engine and avoid
kickback.
[6] Let engine warm up.
Choke Equipped: Move
choke control off or
toward FAST a short dis-
tance at a time over sev-
eral seconds in warm
weather or minutes in
cold weather. Let engine
run smoothly before each
change. Operate with
throttle in FAST.
WARNING
TO STOP ENGINE
CAUTION: Do not stop engine by moving choke
control to CHOKE. Backfire, fire or engine damage
could occur.
[1] Move throttle to SLOW,
then to STOP.
[2] Close fuel shut-off valve
(if equipped).
1/4 TURN

Other manuals for Briggs & Stratton 194700 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Briggs & Stratton 194700 Series and is the answer not in the manual?

Briggs & Stratton 194700 Series Specifications

General IconGeneral
BrandBriggs & Stratton
Model194700 Series
CategoryEngine
LanguageEnglish

Related product manuals