5
3
6. Remove No. 2 cylinder shield.
Fig. 5 − Remove Cylinder Shield
1/4-20
SCREW
#10-24
SCREW
7. Remove valve covers and discard gaskets.
Fig. 6 − Remove Valve Covers
8. Remove rocker arms and push rods, Fig. 7.
Note: Mark push rods so that they may be reassembled in
their original position. Intake valve push rods are
aluminum.
Fig. 7 − Remove Rocker Arms And Push Rods
9. Remove cylinder heads and discard gaskets, Fig. 8.
Fig. 8 − Remove Cylinder Head
To Next Page
Loading...
