OperatorSafety
EquipmentDescription
Readthis manual carefully and becomefamiliar
with your air compressor.Knowits applications, its
limitationsand any hazardsinvolved.
This manualcontains operation and maintenance information
for a single-stage air compressor that produces 5.1 CFMat
40 PSi (2.8 bars) and 4.2 CFIVlat 90 PSi (6.2 bars) using an
120 Volt A.C.electric motor. This high quality system
featuresa direct drive oil lube pump with cast ironsleeve, an
easystart valve,and an air outlet. This unit also featuresa
motor overload protection feature with manual restart.
This air compressor has beenmanufactured to provide an
adequatevolume of compressed air for operating a variety of
light-duty air tools (hand grinders, nailers, ratchets,
staplers), spraying equipment, and inflators requiring less
than 5.1 CFMair flow for operation. Operatethis compressor
ONLYin an ambient temperature rangefrom 32° to 95°F
(0° to 35°0). This compressor is designed for a maximum of
70% duty per hour atfull load.
Everyeffort hasbeen made to ensurethat informationin this
manual isaccurateand current. However,we reservethe
right to change,alter or otherwise improvethe product and
this document at any time without prior notice.
Safety Rules
,_ This isthe safetyalert symbol.It is usedto alert
youto potential personal injury hazards.Obey all
safety messagesthat follow this symbolto avoid
possibleinjuryor death.
Thesafety alert symbol (,_.) is used with a signal word
(DANGER,CAUTION,WARNING),a pictorial and/or a safety
messageto alert you to hazards.DANGERindicatesa hazard
which, if not avoided, will result in death or serious injury.
WARNINGindicatesa hazardwhich, if not avoided, could
result in death or serious injury. CAUTIONindicates a hazard
which, if not avoided, might result in minor or moderate
injury. NOTICEindicatesa situation that could result in
equipment damage. Follow safety messagesto avoid or
reducethe risk of injuryor death.
HazardSymbolsand Meanings
@
A - Explosion
B - Fire
C- ElectricShock
D - ToxicFumes
E - CompressedAir
F - Hot Surface
G- Air Injection
H - Auto-Start
J - Flying Objects
K - ReadManual
4. www.brutepower.com
To Next Page
Loading...
Need help?
General
