BSPP 1950 PSI Pressure Washer
9
How To Use Adjustable Nozzle
You now should know how to START your pressure
washer and how to STOP it.The information in this
section will tell you how to adjust the spray pattern and to
apply detergent or other cleaning chemicals.
1. Slide nozzle forward to adjust spray to low pressure
mode (Figure 8). Slide nozzle backward to achieve high
pressure.
2. Point nozzle towards a firm surface and press trigger
to test spray pattern (Figure 9).
3. Twisting nozzle adjusts spray pattern from a narrow
pattern to a fan pattern (Figure 10).
4. For most effective cleaning, keep spray nozzle between
8 to 24 inches away from cleaning surface.
5. If spray nozzle is held too close to surface, especially
using high pressure mode, damage to surface may
occur.
6. DO NOT get closer than 6 inches when cleaning tires.
Slide nozzle backward
for High Pressure
Mode
Slide nozzle forward for low
pressure mode and
detergent application
Figure 8 — Adjusting Nozzle for Pressure
Figure 9 — Testing the Spray Pattern
Figure 10 — Adjusting the Nozzle for Spray Pattern
Rotate nozzle
counterclockwise for fan
spray pattern
Rotate nozzle clockwise
for narrow spray pattern
• NEVER adjust spray pattern when spraying.
• NEVER put hands in front of nozzle to adjust spray pattern.
A pressure washer produces a high pressure spray
which increases risk of injury and damage to unit.
CAUTION
To Next Page
Loading...
Need help?
General
