Need help?Do you have a question about the Briggs & Stratton ComAp InteliNano NT and is the answer not in the manual?
Case dimensions and panel cutout specifications for the controller.
Procedure for entering the controller's setup menu using buttons.
Selection of input types for user-defined curves, such as fuel level or temperature.
Core operational parameters like nominal voltage, frequency, and connection type.
Configuration of engine-related parameters and protective shutdowns.
Settings for generator overvoltage, undervoltage, and frequency protections.
Logging of system events with timestamps and running hours.
Recording of active warnings with corresponding symbols and running hours.
Details on shutdown events, including confirmation status and running hours.
Diagnostic messages from the ECU, including SPN and FMI codes.
Detailed description of how events are saved with running hours.
Explanation of active and inactive warning states and their indicators.
Process for engine shutdown, alarm confirmation, and state changes.
How diagnostic messages from the ECU are displayed and interpreted.
Procedure for starting and stopping the engine manually.
How the controller automatically starts the engine based on conditions.
General| Operating Temperature | -40°C to +70°C |
|---|---|
| Supply Voltage | 8-36 V DC |
| Protection Rating | IP20 |
| Communication Ports | RS485 |
| Supported Protocols | Modbus RTU |
To Next Page
