17
2023_001
1 Introduction
1.1 Product description
The product is an electric ice maker.
1.2 Intended use
The product is intended for household use to make ice.
1.3 Symbols
Read the operating instructions carefully
and make sure that you understand the
instructions before you use the product.
Save the instructions for future reference.
Fire risk – flammable material.
This product complies with applicable EU
directives and regulations.
Discarded product must be recycled
according to current regulations.
1.4 Product overview
Figure 1
1. Lid with transparent window
2. Micro switch support
3. Ice shovel board
4. Ice tray
5. Tank
6. Control panel
7. Front housing
8. Ice scoop
9. Top cover
10. Water tray
11. Evaporator
12. Motor mount
13. Rear housing
14. Air vent
1.5 Control panel overview
Figure 2
15. ICE FULL indicator light
16. ADD WATER indicator light
17. ICE MAKING indicator light
18. Power button
2 Safety
2.1 Safety definitions
Warning! If you do not obey these instructions, there
is a risk of death or injury.
Caution! If you do not obey these instructions, there
is a risk of damage to the product, other materials or the
adjacent area.
Note! Information that is necessary in a given situation.
2.2 Safety instructions for operation
● The product contains flammable materials. Use the
product with caution.
● Do not allow anyone who is unfamiliar with the product
to use it.
● The product may be used by children above the age of 8
and persons with physical, sensorial or mental disabilities
under supervision.
● Do not use the product if it is damaged.
● Do not use the product if the power cord is damaged.
● A damaged power cord or plug must be replaced by an
authorized service center.
● Do not modify the product.
● Do not use the product other than what it is intended for.
● Do not try to accelerate the defrosting process unless
recommended by the manufacturer.
● Do not use electrical devices in the product unless
recommended by the manufacturer. Risk of fire and/or
electric shock.
● Do not store explosive substances inside the product.
● Do not damage the refrigerant circuit.
● Make sure that the product is not damaged when you
transport or install it.
● Do not use the product outdoors.
● Make sure that the air vents on the product are not
blocked.
● Only fill the tank with potable water.
● Do not use purified water to fill the tank. Risk of water
sensor malfunction.
● Keep the product at a distance of at least 15 cm from
walls or other objects.
To Next Page
Loading...