● Make sure that no water or any other liquid gets into the
product, this can damage the product.
● Do not store or use the product in extreme temperatures.
Do not expose the product to temperatures over 60°C. Do
not burn the product.
● Do not expose the product to knocks and blows.
● Do not use strong detergent or solvent to clean the
product.
3 Installation
Note! If the product is to be installed on a concrete wall, drill
holes and use the wall plugs.
3.1 To install the product
2 brackets are included with the product, select one bracket
that is applicable on the place where you are going to install
the product.
1 Install the bracket (A) on the wall with the screws and
attach the product to it. (Figure 2)
2 Install the bracket (B) on the wall. Attach the product
onto the bracket. (Figure 3)
19
EN
To Next Page
Loading...