2 During connection, make sure the router, mobilephone
and the camera are as close as possible.
3 When the camera is added successfully click the pen
icon to re-name the camera and then click “Done”.
3.3 To reset the product
● Hold and push the button for 5 seconds.
Note! If you have modified the settings, they will return to
factory settings.
3.4 LED light Status
LED light Status
Camera
Constant RED light
The product is starting or there is a
malfunction.
Slowly RED light
flashing.
Waiting for a network connection.
Rapidly RED light
flashing.
The product is trying to connect to
the network.
22
EN
To Next Page
Loading...