3.2.3 To log in to the Smart Life app
1 Click on ”Log in with an existing account”.
2 Enter the mobile phone number or email address used
to register and the password to log in. The operating
system iOS will then use Apple ID to log in.
3.2.4 To connect the product to the Smart Life app
Note! The router supports 2.4 GHZ Wi-FI not 5 GHz. If your Wi-
Fi is set on 5 GHz, change it to 2.4 GHz. Refer to the manual of
your router.
1 Set the parameters of the router before connecting to
the Wi-Fi and record the SSID and the password of your
Wi-Fi.
2 Open the Smart Life App and follow the instruction in
the app.
3.2.5 QR Code configuration
1 Scan the QR-code in your phone with the product
when the camera is detected a promt audio “ dong
dong dong” will be heard. It takes about 30 seconds to
complete the configuration. (Figure 8)
Note! Scan the QR code from 15-20 cm away.
21
EN
To Next Page
Loading...