Need help?Do you have a question about the Brink Flair 325 Plus and is the answer not in the manual?
General| Input Voltage | 230 VAC |
|---|---|
| Power Consumption | 5 W |
| Temperature Control Accuracy | ± 0.5 °C |
| Display | LCD |
| Protection Class | IP20 |
| Weight | 150 g |
| Type | Temperature Controller |
Presents detailed technical data including dimensions, weight, filter class, and sound power.
Illustrates right-hand version connections and external dimensions of the appliance.
Describes the appliance's function, ventilation modes, and control system overview.
Details the bypass function, its operation, and conditions for opening/closing the valve.
Explains the procedure for connecting the condensate discharge line and siphon.
Provides instructions for airtight installation of air ducts, noise reduction, and duct placement.
Introduces the section on electrical connections for the appliance and its accessories.
Explains how to adjust the air flow rate through the settings menu.
Explains how the appliance indicates faults using symbols and numbers.
Details non-locking faults, showing explanations and solutions on the display.
Continues listing fault codes related to preheaters and postheaters, with causes and actions.
Explains how to clean or replace the appliance filters when indicated.
Covers reassembling the appliance, installing new filters, and resetting the filter timer.
Covers settings for cascade, communication, appliance settings, signal output, and standby.
Continues listing settings for the Plus PCB, including 0-10V inputs and geo-heat exchanger control.
To Next Page
