To Next PageTo Next Page
Need help?Do you have a question about the Brink Air Control and is the answer not in the manual?
General| Brand | Brink |
|---|---|
| Model | Air Control |
| Category | Temperature Controller |
| Language | English |
Provides a description of the Brink Air Control system and its components.
Explains the various symbols and icons used throughout the manual for warnings and instructions.
Details the general product specifications, including electrical and power requirements.
Discusses environmental conditions affecting the Brink Air Control's proper operation.
Provides a description of the buttons and controls available on the Brink Air Control.
Details the elements displayed on the main screen of the Brink Air Control.
Describes the different ventilation modes available and how to activate them.
General safety warnings and precautions to be followed during installation and use.
Guidelines and warnings for safely placing the Brink Air Control unit.
Safety recommendations to ensure proper and safe operation of the device.
Safety considerations and precautions for performing maintenance on the device.
Information regarding the disposal and environmental impact of the Brink Air Control.
Details on disconnecting the module, electrical connections, mounting the wall bracket, and replacing the module.
Guide to selecting the user interface language for the device menus.
Instructions for setting the current time on the Brink Air Control device.
Procedure for setting the current date on the Brink Air Control device.
Process for choosing the regulated device when multiple units are connected.
Explains how to navigate through the menus and screens of the Brink Air Control.
How to choose the device to regulate when multiple devices are connected.
Introduction to the three types of weekly ventilation programmes available.
Details the default settings for weekly programmes P1, P2, and P3.
Step-by-step guide to creating a daily program for every day of the week (P1).
Instructions for creating two daily programs: one for weekdays and one for weekends (P2).
Guide to creating seven separate daily programs for each day of the week (P3).
How to select and activate one of the programmed weekly types (P1, P2, or P3).
Instructions for temporarily overriding the current ventilation program.
How to manually override the ventilation program for an extended period.
Procedure for manually adjusting the values for different ventilation modes.
How to view the current settings and device information without making changes.
Steps to reset all connected device settings back to their original factory configurations.
Basic cleaning instructions and recommendations for maintaining the device.
Information on filter notifications and the process for cleaning or replacing filters.
How to reset the filter notification indicator after filter maintenance.
Warning against self-dismantling; requires authorized maintenance personnel.
Warning against self-repair; requires authorized maintenance personnel.
Guidance on proper disposal of the Brink Air Control as electronic waste.
Guidance on resolving common error notifications indicated on the device.
Details regarding the product's guarantee period and terms.
Standard weekly settings for Programme P1, covering Monday through Sunday.
Standard weekly settings for Programme P2, distinguishing weekdays from weekends.
Standard daily settings for Programme P3, with Monday as the reference day.
