Brink Air Control User Manual

11
You can choose between ‘Week’ and ‘Weekend’. With ‘Week’
you can set a day program for Monday through Friday. With
‘Weekend’ you can set a day program for Saturday and
Sunday.
Week
 Select ‘Week’ by turning
1
 Press
1
. ‘Week’ opens
(*) You have a choice from ‘Period 1’, ‘Period 2’, ‘Period 3’,
‘Period 4’, ‘Period 5’ and ‘Period 6’. Every period is a part of
the day in which you can set a ventilation mode.
Perform the following actions to set period 1:
 Select ‘Period 1’ by turning
1
 Press
1
, ‘Period 1’ opens
 Select ‘Start Time’ by turning
1
 Press
1
, ‘Start Time’ opens
 Change the start time by turning
1
You have a range of between 3.00 hrs and 2.59 hrs
 Press
1
WRFRQ¿UPWKHVWDUWWLPH
Now set the ventilation mode for period 1.
Perform the following actions for this:
 Select ‘Ventilatiestand’ by turning
1
 Press
1
, ‘Ventilatiestand’ opens
 Set the ventilation mode for period 1 by turning
1
 Press
1
WRFRQ¿UPWKHDLUÀRZIRUSHULRG
You have set the ventilation mode for period 1 You can set
period 2 through 6 in the same manner. A period ends when a
new one starts.
Weekend
 Follow the steps from paragraph 4.3.3, until you have a
choice between ‘Week’ and ‘Weekend’
 Select ‘Weekend’ by turning
1
 Press
1
. ‘Weekend’ opens
 Continue the steps from paragraph 4.3.3 at (*)
4.3.4 Creating a P3 program (see
1
)
 Press return
2
as many times as necessary to get to the
main screen
 Press
3
.‘Setting & activating timer programme’ opens-
Select ‘P3: day’ by turning
1
 Press
1
, ‘P3: day’ opens
(*) You can choose from the days between ‘Monday’ through
‘Sunday’. You perform the following steps to set a day program
for Monday:
 Select ‘Monday’ by turning
1
 Press
1
. ‘Monday’ opens
You have a choice from ‘Period 1’, ‘Period 2’, ‘Period 3’, ‘Period
4’, ‘Period 5’ and ‘Period 6’. Every period is a part of the day in
which you can set a ventilation position.
Perform the following actions to set period 1:
 Select ‘Period 1’ by turning
1
 Press
1
, ‘Period 1’ opens
 Select ‘Start Time’ by turning
1
 Press
1
, ‘Start Time’ opens
 Change the start time by turning
1
You have a range of between 3.00u and 2.59u
 Press
1
WRFRQ¿UPWKHVWDUWWLPH
Now set the ventilation mode for period 1.
Perform the following actions for this:
 Select ‘Ventilatiestand’ by turning
1
 Press
1
, ‘Ventilatiestand’ opens
 Set the ventilation mode for period 1 by turning
1
 Press
1
WRFRQ¿UPWKHYHQWLODWLRQPRGHIRUSHULRG
You have set the ventilation mode for period 1 You can set
period 2 through 6 in the same manner. A period ends when a
new one starts.
If you have created a day program for Monday, you can do the
same for the other days of the week. Then repeat the steps
from paragraph 4.3.4, but, after (*) choose another day inste-
ad of ‘Monday’.
4.4 Activate programme type (P1, P2 or P3)
The Brink Air Control has three types of weekly programs P1,
P2 and P3. You can program the weekly programs by yourself,
for more information see paragraph 4.3.
Perform the following actions if you wish to program one of the
weekly programs (see
1
):
 Press return
2
as many times as necessary to get to the
main screen
 Press
3
.‘Setting & activating timer programme’ opens
 Select ‘Active Program’ by turning
1
 Press
1
. ‘Active Program’ opens
 Select P1, P2 or P3 by turning
1
 Press
1
to activate P1, P2 or P3
4.5 Temporarily overriding program
You can temporarily override the program. You need to per-
form the following actions for this (see
1
):
 Press return
2
as many times as necessary to get to the
main screen.
 Press
5
.‘Bypassing the timer programme’ opens
 Turn
1
to temporarily set the ventilation mode.
Take note! It is stated at the top of your screen, how
long the newly set ventilation mode applies. The pro-
gram will be enabled again after this period of time.
The override period will be 30 minutes if you overruled
the device in the maximum position. You can also
undo this by pressing return
2
. Return button
2
can
not be operated until some 10 seconds after the latest
setting!
4.6 Overriding the program for a longer period of
time
A set program me can be overriden manually, for example,
during holidays. Perform the following actions to overrule the
program (see
1
):
 Press return
2
as many times as necessary to get to the
main screen
 Press
4
. ‘Manual’ appears in the display
 Turn
1
to set the ventilation position

Brink Air Control Specifications

General

Brand	Brink
Model	Air Control
Category	Temperature Controller
Language	English