12 1019101-E
English Manual
================================================================================================
ASSEMBLY
Step 5-A
While wearing gloves, carefully
and gently flip the Spike Aerator over.
Step 5-B
INSTALL FIRST WHEEL
Attach a wheel (9) to the wheel bar
mount on the Axle (6).
IMPORTANT:
Attaching the wheel without all of the
proper hardware will cause the wheel to
wobble. Insure all hardware is used, see
inset below.
21
9
6
21
20
28
19
Secure the first wheel to the right side
using hardware in this order:
• 1/2” x 3” Hex Bolt (19)
• 1/2” Flat Washer (21)
• Wheel (9)
• 1/2” Flat Washer (21)
• 1/2” Hex Nut (20)
( Wheel Bar Mount on the Axle )
• 1/2” Hex Lock Nut (28)
19
21
20
28
21
9
6
To Next Page
Loading...
Need help?
General
