Brinly ST-152BH - ASSEMBLY; ATTACHING AXLE BRACKETS; ADDING THE AXLE

8 1018959-B
==================================================================================================
ASSEMBLY
English Manual
x4
From the outside edge,
run two 5/16” x 3/4” hex head
bolts (44) through the triangular
Axle Bracket (4) and Frame
Bracket (1).
Assembly Step 2
Attaching the Axle Brackets
Align the triangular Axle Bracket (4) with the
Frame Bracket (1) as illustrated.
1
Secure on the inside lip
of the frame bracket with
two 5/16” hex nuts (47).
47
44
Repeat this step on the other side of the
tank with the Right-Hand Frame Bracket (2).
SECURE ALL BOLTS FULLY.
Assembly Step 3-A
As illustrated, run the
Axle (5) through the
triangular Axle Brackets
(4) that were added on
Step 2.
Adding the Axle
5
4
4
1
2
44
47
47
4