Brinno ATH100 User Manual

User Manual
ATH100
Weather Resistant Housing
Package Contents
Parts of ATH100
Specication
1. ATH100 Weather Resistant Housing x1
2. User manual
Dimension
Weight
Material
Waterproof
89(W)x125(L)x54(D) mm
110 g
PC, acrylic, and rubber
IP54
1
2
3
5
4
6
7
8
1. Latch
2. I/O port
3. I/O USB port
4. Seal
5. MENU Control
6. TIME Control
7. OK/START
8. Extended space*
* this Space is for TLC200
Extension port cover.
7F, No.75, Zhou Zi St., Taipei City 11493, Taiwan
Phone:+886-2-8751-0306 Fax:+886-2-8751-0549
customerservice@brinno.com
www.brinno.com
Thank you for purchasing Brinno Time Lapse Camera Accessories!
If you have any questions or problems setting up your Brinno TimeLapse Camera
please contact the sales sta where you purchased our product or email us at
Brinno Incorporated directly:
customerservice@brinno.com
301-0036-00 EN A1
Product specifications, size and shape are subject to change without notice, and actual product appearance
may differ from that depicted herein.

Brinno ATH100 Specifications

General

Model	ATH100
Category	IP Camera
Resolution	1280 x 720
Lens	F2.0
Video Format	H.264
Storage	Micro SD card (Up to 32GB)
Power Source	Battery
Wireless	No
Battery Type	AA batteries
Weight	200 g

Summary

ATH100 Parts Identification

Latch Mechanism

The primary mechanism used to secure the weather-resistant housing.

I/O and USB Ports

Interface ports for connecting external devices and power.

Waterproof Seal

Essential component ensuring the housing's water and dust resistance.

Control Buttons

Buttons for menu navigation, time settings, and starting/stopping.

Extended Space

Designated area for specific accessories, like the TLC200 extension port cover.

ATH100 Technical Specifications

Dimensions and Weight

Physical size (89x125x54 mm) and weight (110 g) of the housing.

Materials and Waterproofing

Housing constructed from PC, acrylic, rubber; rated IP54.

ATH100 Installation and Operation

Camera Setup for Installation

Power on the camera and position its lens forward before insertion.

Housing Insertion and Sealing

Place camera in housing, align seal, and latch buckles to ensure waterproofing.

Starting Time Lapse Capture

Configure the time interval and press OK to begin recording.