MAC200 DN
16
Hybrid Time Lapse Mode
Hybrid Motion Mode
When any movement is detected in
the Detecting Zone (Detect angle
= 100°/ Detect distance = 6 M), the
Motion Activated Camera will shift to
the Motion Mode, and captures 2-3
photos per second. At this range it
will record the target in greater detail.
Normally, the Motion Activated
Camera is operating in the Time Lapse
mode. It features an extended-time
and wide angle recording area. The
Playback Rate (the lm frequency) is
custom and based on your setting.
(E.g. 1 minute captures 1 photo.)
To Next Page
Loading...
