Brinno PHV MAC - Installation Guide

12
Installation
Insert PeepHole lens in the outside of the door.1.
1
2
For the 14mm Peephole
Insert the PeepHole barrel
through Base Flange and
insert both into the hole
on the inside of the door.
Tighten the PeepHole Barrel
with your ngers.
PHV MAC14
For the 12mm Peephole
(North American users most likely.)
Insert the Peephole barrel through
the Washer and Base Flange and
insert both into the hole on the
inside of the door. Tighten the
PeepHole Barrel with your ngers.
PHV MAC12
Installation