TIME LAPSE CAMERA
TLC 300 User manual 27
Flicker Filter
If you are filming indoors and are using fluorescent bulbs, you
will need to set up flicker filter to prevent light bands from
appearing on your footage.
At preview screen, press “MENU” to access settings.
Press “INFO” to go to go down to Advanced and press “OK” to
enter Advanced settings.
Select “Flicker filter” and press “OK” to enter filter settings.
Select the suitable filter for your filming environment and press
“OK” to save. After saving, you will return to Advanced menu
settings.
Press “MENU” button to return to main menu, and press again
to return to preview screen.
1
2
3
4
5
Before choosing your f ilter, check your country’s power f requency. Most
countries in North America, South America, and East Asia use 60Hz. The rest of the
world mostly uses 50Hz.
!
To Next Page
Loading...
