Getting Started
Charging your Beardscape
8
• Plug the USB style charger into the transformer and plug into
the wall.
• The charging plug can either be connected directly to the bottom
of the Beardscape or plugged into the charging cradle.
• If you are using the charging cradle, plug it in and set the
Beardscape in, bottom first.
• Make sure the charging bubble icons appear.
• Most Beardscape trimmers come partially to fully charged.
• A complete charge may take up to 3 hours.
• The Beardscape will beep and automatically stop charging when
the battery is full.
• If the battery is low, the Beardscape can still be used while plugged
directly into the wall.
To Next Page
Loading...