To Next PageTo Next Page
Need help?Do you have a question about the Bristan N2 SHCVO C and is the answer not in the manual?
General| Brand | Bristan |
|---|---|
| Model | N2 SHCVO C |
| Category | Control Unit |
| Language | English |
Details on fitting flow regulators for instantaneous water heaters and combination boilers.
Instructions for flushing pipework and turning off water supply before installation.
Steps for marking, drilling, and securing the shower valve to the wall.
Procedure for connecting hot and cold water supply pipes to the valve inlets.
Guidance on connecting pipework to the chosen shower product outlet.
Steps for fitting the concealing plate, using sealant for a secure finish.
Instructions for screwing the shrouds onto the valve body.
Procedure for attaching spline adaptors and handles, securing them with grub screws.
Methods for fixing the wall outlet depending on wall type, with or without rear access.
Guidance on positioning the riser rail and marking bracket locations on the wall.
Steps for attaching the bottom wall bracket, ensuring it's vertical and secure.
Instructions for inserting the riser rail into the wall brackets.
Procedure for fitting the hose retainer and slider onto the riser rail.
Steps for attaching the top wall bracket and securing it to the wall.
Instructions for fitting end caps to cover the wall bracket fixings.
Procedure for connecting the shower hose to the shower valve, ensuring the washer is fitted.
Procedure for connecting the shower hose to the showerhead and placing the handset.
Advice on cleaning the fitting using soft cloths and mild soap, avoiding harsh chemicals.
Steps for servicing the shower valve cartridge in hard water areas for optimal flow.
Common causes and remedies for issues like low flow or fluctuating water temperatures.
Troubleshooting steps for when only one temperature of water is dispensed.
Explanation of normal slight leakage and how to address cartridge issues.
Guidance on resetting the maximum temperature setting if it's incorrect.
Troubleshooting for outlet temperature issues related to filters or installation conditions.
Addressing low hot water temperature due to supply issues or incorrect settings.
