Brita Active - Inserting the MicroDisc; Filling the Bottle; Changing the MicroDisc

EN
5
|
English
3) Inserting the MicroDisc
Remove the bottle cap
1
. Unscrew disc cover
3
anti-clockwise
C
and insert the disc
D
. Then screw the disc cover back on and put
the cap back on.
4) Filling the bottle
Unscrew bottle base
6
and ll the bottle with tap water
E
. Then
screw the base back on to the bottle.
Remove the cap, open the mouthpiece and your Water Filter Bottle is
now ready to use!
5) Changing the MicroDisc
One MicroDisc can lter up to 60 litres of water. To ensure optimal l-
tration and hygiene, BRITA recommends the MicroDisc to be replaced
every 4 weeks. To do this, repeat step 2 and 3. In some regions, the
ltration of tap water containing particles can result in a signicantly
lower ow rate. In such cases, we recommend
changing the MicroDisc more frequently.
I. For quality
from the very start