To Next PageTo Next Page
Need help?Do you have a question about the Brita TOTAL 360 BRDROS and is the answer not in the manual?
Notes on installation requirements, product water testing, and component replacement.
List of items included in the shipping carton for the RO system.
Guidance for installing the system within a kitchen or bathroom sink cabinet.
Instructions for setting up the system in a remote area like a laundry room.
Advice on checking and ensuring adequate space for proper installation.
Steps for preparing the installation site, including shutting off water and checking space.
Guidance on selecting the appropriate cold water supply fitting based on local codes.
Detailed steps for installing the provided cold water supply fitting.
Information on using optional compression fittings for the cold water supply.
Procedure for installing the drain adaptor onto the sink's drain pipe.
Steps to route the drain tubing to a remote point with a proper air gap.
Instructions for applying Teflon tape and connecting the tubing connector to the storage tank.
Guidance on choosing a suitable location for the reverse osmosis faucet.
Steps for assembling and mounting the reverse osmosis faucet onto the sink or countertop.
Instructions for cutting tubing square and properly connecting them to fittings.
Procedure for safely disconnecting tubing from the system fittings.
Connecting various colored tubes to the storage tank, water supply, faucet, and drain adaptor.
Completing the red tube connection to the reverse osmosis faucet.
Instructions for sanitizing the system with bleach after installation.
Steps to pressure test the system and check for any leaks after installation.
Procedure for purging the system by running water through it for 24 hours.
Explanation of the prefilter, RO cartridge, storage tank, postfilter, and faucet functions.
Detailed schematic and step-by-step description of water flow through the system.
Recommended maintenance for prefilter, postfilter, and RO membrane cartridges.
Instructions for replacing prefilter, postfilter, and RO membrane cartridges.
Maintenance for the drain flow control and procedures for changing the collet and O-ring.
A guide to diagnosing and resolving common issues like taste, odor, and slow water production.
Details on the one-year and lifetime warranty coverage and requirements.
General terms, conditions, and exclusions applicable to the system's warranty.
A visual breakdown of all system parts with numerical identifiers.
A detailed list of system parts, their descriptions, and corresponding part numbers.
Performance data for NSF/ANSI Standards 42, 473, and 53, detailing contaminant reduction.
Performance data for NSF/ANSI Standard 58, covering various contaminants like heavy metals and cysts.
Performance data for NSF/ANSI Standard 401, including emerging contaminants.
Data on the reduction of Volatile Organic Compounds (VOCs) and chloroform.
Further details on VOC reduction, including specific compounds.
Information on the system's flow rate and capacity.
Information regarding arsenic in water and the system's pentavalent arsenic reduction capabilities.
Advice on periodic water testing and following maintenance schedules.
General| Brand | Brita |
|---|---|
| Model | TOTAL 360 BRDROS |
| Category | Water Filtration Systems |
| Language | English |
