CHECKLIST
ü Check that the vehicle belt is tight and that the base
is secure. The base is secure when it moves less
than 2.5 cm (1 inch) front-to-back or side-to-side at
the vehicle belt path.
ü Check that the recline angle is correct and confirm
that the red marker is visible between the two lines
on the recline angle indicators.
4. Hold the vehicle shoulder
belt tightly and slide firmly
under the lock-o on the
side of the base opposite
the buckle.
Base Installation with Lap-Shoulder Belt
B Safe Can MPP user guide.indb 15 1/30/2015 5:11:53 PM
To Next Page
Loading...
