Lap Belt Installation
1. Secure your child in the
infant car seat before
installing the car seat in the
vehicle.
2. Place the infant car seat
rear facing on the vehicle
seat.
3. Pull the vehicle belt out
and route it through the
carrier only belt guides.
4. Verify that the vehicle
belt is not twisted and
then buckle. Lock your
vehicle seat belt system as
instructed by your vehicle
owner’s manual.
IMPORTANT: Check your vehicle owner’s manual to
determine how to lock your vehicle belt system.
B Safe Can MPP user guide.indb 24 1/30/2015 5:11:54 PM
To Next Page
Loading...
