CHECKLIST
ü Check that the vehicle belt is tight and that the base
is secure. The base is secure when it moves less
than 2.5 cm (1 inch) front-to-back or side-to-side at
the vehicle belt path.
ü Check that the recline angle is correct and confirm
that the red marker is visible between the two lines
on the recline angle indicators.
3. Press the base firmly into
the vehicle seat while
removing all slack from the
vehicle seat belt.
Base Installation with Lap Belt
B Safe Can MPP user guide.indb 17 1/30/2015 5:11:53 PM
To Next Page
Loading...
