1. Unbuckle the harness by
pressing the red button in
the center of the buckle
and sliding both harness
tongues out of the buckle.
2. Locate the buckle strap
retainer on the bottom of
the infant car seat and
pull away from the seat to
loosen.
3. Turn the buckle strap
retainer so that the short
side will go through the
slot in the infant car seat
shell and cover.
4. Pull the buckle and belly
pad out of the slots in the
shell and cover.
IMPORTANT: If your child eats and drinks while in the
child seat, you will need to check the buckle periodically
and rinse out any accumulated debris (see page 44)�
B Safe Can MPP user guide.indb 32 1/30/2015 5:11:55 PM
To Next Page
Loading...
