23
B-SAFE GEN2 User Guide
5. Push the infant car seat
firmly into the vehicle seat
while removing all slack
from the lap portion and
then the shoulder portion
of the vehicle belt.
Carrier Only Installation with Lap-Shoulder Belt
CHECKLIST
ü The vehicle belt is tight, not twisted, and that the infant
car seat is secure.
ü The infant car seat is secure when it moves less than
1 inch (2.5 cm) front-to-back or side-to-side at the
vehicle belt path.
ü Recline angle is correct. The proper recline angle is
achieved when the level line on the shell is level to the
ground.
ü The infant car seat handle is rotated and locked into
position 1. See page 33.
To Next Page
Loading...
