Britax B-SAFE GEN2 - Care and Maintenance; Removing the Seat Cover

39
B-SAFE GEN2 User Guide
Care and Maintenance
Removing the Cover
1. Remove the canopy.
a. Unhook the elastic,
and push the button.
b. Lift up the canopy
from both sides.
2. From the back of the
infant car seat remove
both harness straps
from the harness yoke.
3. From the front of the
infant car seat pull
both harness straps
out of the shell, cover
and head pad. Remove
head pad and comfort
pads.
4. Unbuckle the harness
and chest clip then
remove the belly pad
and buckle. See page
32-33.
IMPORTANT: Before each use, check this car seat and its
components to make sure they are in good condition and
good working order.