22
HOW TO INSTALL
D. Fully lengthen seatbelt and feed between
the comfort pad and the inner seat through
seatbelt slot on each side. The slots
are labeled in blue- REARWARD
FACING BELT PATH.
E. Engage seatbelt buckle and tongue. Push
down on the seat (by hand), whilst pulling the
sash belt firmly to tighten the seatbelt. This
will make the lap belt very tight across the
restraint. Whilst holding the seatbelt tension,
ensure to remove all slack from lap part of
seatbelt by pulling sash belt. For retractor
seatbelts, allow excess belt to feed back into
retractor.
Push down on seat
NOTE: Seatbelt buckle and tongue must not
rest between restraint cover and restraint. If
seatbelt buckle is adjustable, adjust buckle as low
as possible away from the restraint.
2
1
Blue REARWARD
FACING BELT
PATH label
Feed seatbelt
through slots.
BABY USE REARWARD FACING
E
D
E
To Next Page
Loading...
