Cover Removal
Remove the screw to unlock the head 5
restraint adjuster. Raise the head
restraint to the highest position.
Store the screw in a safe place.*
Care and Maintenance Care and Maintenance
WARNING:
Do not take apart the harness. •
Never remove the buckle tongues from the harness. They cannot be •
reattached after removal.
Never remove the HUGS system from the harness straps.•
Loosen the harness by lifting the 1
harness adjuster release lever
located on the front of the child
seat while pulling BOTH harness
straps forward.
Move the harness adjuster to the
2
highest position
Unhook the harness straps from
3
the yoke.
Pull the harness straps through the
4
shell and cover to the front of the
child seat.
Unhook the elastic bands, then remove 6
the cover from the head restraint.
Be careful not to damage the *
energy-absorbing foam.
Pull the elastic from the cup holders
7
on the bottom of the seat. (Seat shown
laying on back.)
Pull the fabric from the cup holder
8
housing. (Seat shown laying on back.)
Unfasten the clips behind the armrests.
9
(Seat shown laying on back.)
Pull the cover from the lower belt 10
guides.
1. Lift lever
2. Pull
BOTH
harness
straps
To Next Page
