Adjusting Buckle Position
Removing the Buckle
Re-threading the Buckle
IMPORTANT:
Select the slot closest to, but not under the child.
Unbuckle the harness.
1 Locate the buckle retainer on the 2
bottom of the child seat.
Pull the buckle retainer through
6
the slots in the child seat shell and
cover to the top of the child seat.
Turn and push the buckle retainer
1
so that the short side will pass
through the slot in the cover and
child seat shell.
Pull the buckle retainer through
2
the slots in the cover and child
seat shell to the bottom of the
child seat.
Pull the buckle away from the
4
child seat until tight. Verify that
the buckle retainer lies flat against
the child seat shell.
Ensure that the buckle strap *
is not twisted and that the
button faces out.
Turn and push the buckle retainer so 5
that the short side will pass through
the slot in the child seat shell
NOTE: The belly pad must be pulled over the buckle retainer to remove.
Child Seat features OverviewChild Seat features Overview
Slide the buckle retainer up or 3
down to release it from the child
seat shell.
Pull the buckle retainer away from
4
the child seat to loosen.
Slide the buckle retainer back into
3
place to hold it against the child
seat shell.
1. Press release
button
2. Pull
tongues
from
buckle
To Next Page
Loading...
