31
If there is a problem achieving the
proper recline angle after installing, try
another approved seating position in
your vehicle or:
a. Uninstall the child restraint and
remove it from the vehicle seat.
b. Place one or more rolled towels
or pool noodles in the vehicle
seat bight.
c. Place the child restraint against
the towel(s) or pool noodle(s) to
level the child restraint and install.
Adjusting the Recline Angle
‐ When installed, the level line on
the label of the child restraint
should be level to the ground.
b
c
To Next Page
Loading...
