EasyManua.ls Logo

Britax Willow S - Child Restraint Functions; Adjusting the Harness

Britax Willow S
159 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45
The child restraint is assembled with the
harness in the inner loop.
Inner Loop: Maximum 5kg (11 lbs).
Outer Loop: 1.8kg - 13.6kg (4 - 30 lbs)
IMPORTANT: The harness straps should
be located in the closest harness height
position below the child’s shoulders.
IMPORTANT: Ensure the harness straps
are fully secured on the harness yoke.
Inner Loop
Outer Loop
1. Loosen the child restraint harness by
pressing the harness adjuster release
lever and pulling both harness straps
forward.
1
Child Restraint Functions
Adjusting the Harness

Table of Contents

Related product manuals