Need help?Do you have a question about the Brivis SP615IN and is the answer not in the manual?
Requirements and steps for connecting the gas supply and electrical power.
Guidelines for installing flues for SP5 and SP6 internal heaters.
Installing flue terminals, cutting wall openings, and clearance requirements.
Guides on where and how to install the remote thermistor for accurate temperature control.
Procedures for connecting and routing the condensate drain pipe for SP6 heaters.
Installing the thermistor, flue terminal, and associated clearances for BX5 models.
How to wire and install the Brivis Networker thermostat.
Procedures for initial setup, testing, and optimizing heater performance.
Requirements and steps for connecting the gas supply and electrical power.
Guidelines for installing flues for SP5 and SP6 internal heaters.
Installing flue terminals, cutting wall openings, and clearance requirements.
Guides on where and how to install the remote thermistor for accurate temperature control.
Procedures for connecting and routing the condensate drain pipe for SP6 heaters.
Installing the thermistor, flue terminal, and associated clearances for BX5 models.
How to wire and install the Brivis Networker thermostat.
Procedures for initial setup, testing, and optimizing heater performance.
General| Category | Gas Heater |
|---|---|
| Model | SP615IN |
| Efficiency | 85% |
| Weight | 35 kg |
| Gas Type | Natural Gas |
| Input Gas Pressure | 1.13 kPa |
| Thermostat | Yes |
| Ventilation | Flued |
| Ignition | Electronic |
To Next Page