6. Select the Data encryption (WEP enabled) box.
7. Type the network name in the Network name (SSID) box and again in the Confirm network key box.
8. Clear the The key is provided for me automatically box.
9. Type the network key in the Network key box.
NOTE—It is not necessary to select the Key format or the Key length before typing the network key. These settings
automatically change to the appropriate setting as the network key is typed.
10. Select the This is a computer-to-computer (ad hoc) network; wireless access points are not used box.
11. Click OK.
12. Click Advanced
file:///P|/User%20Manuals/HP%20XP%20WLAN%20Card/utility.htm (12 of 14) [1/30/03 10:11:20 PM]
To Next Page
Loading...
