Broadcom 95xx User Guide
Broadcom
®
95xx PCIe 4.0 MegaRAID
®
and HBA Tri-Mode Storage Adapters
Features
RAID Features
The following list includes primary RAID features that the MegaRAID adapters support. For a full description of the RAID
features, refer to the 12Gb/s MegaRAID Tri-Mode Software User Guide, located at http://www.broadcom.com/support/
download-search.
•
RAID levels 0, 1, 5, and 6
•
RAID spans 10, 50, and 60
•
JBOD mode with RAID0, RAID1, and RAID10
•
JBOD for SDS environments
•
Online Capacity Expansion (OCE)
•
Auto resume after loss of system power during array rebuild or OCE
•
Single controller multipathing
•
Load balancing
•
Configurable stripe size up to 1 MB
•
Fast initialization for quick array setup
•
Check Consistency for background data integrity
•
SSD support with SSD Guard
™
technology
•
Patrol read for media scanning and repairing
•
Disk data format (DDF)-compliant Configuration on Disk (COD)
•
Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T) support
•
Global and dedicated hot spare with revertible hot spare support
•
Automatic rebuild
•
Enclosure affinity
•
Emergency SATA hot spare for SAS arrays
•
Enclosure management
•
SCSI Enclosure Services (SES) (inband)
•
SGPIO (sideband)
•
DataBolt bandwidth optimizer technology support for compatible expander-based enclosures
•
Shield state drive diagnostic technology
Operating System Support
The tri-mode storage adapters support the operating systems in the following list. For specific version information, refer to
the MegaRAID Tri-Mode Device Driver Installation User Guide, located at http://www.broadcom.com/support/download-
search.
Broadcom
95xx-MR-HBA-Tri-Mode-UG104
7
To Next Page